|
Insulation stripper for 11/20kV cables
Specially engineered for professional stripping of EPR or XLPE insulation on medium/high-voltage copper or aluminium single core cables. Suitable for cross sections from 25 to 300mm2.
Technical Characteristics
The tool comprises of a T-handle (with a built-in length adjustment mechanism), various interchangeable stripping inserts for different voltages and cross sections (see table below)
The connection between the T-handle and the stripping insert is by means of a bayonet cap, therefore without need of additional tooling
The tool is designed for single handed operation and allows simple and accurate stripping of cables
The stripping length can be adjusted in 2mm steps from 20 to 100mm by means of the screw housed in the handle. The chosen stripping length is visible on a scale in the body of the handle
Each stripping insert contains a cutting blade designed and positioned to strip easily and precisely the EPR or XLPE and the semi-conductive layer in contact with the core. The insulation is removed without damaging the core
Once the stripping operation is complete, the surface is uniform, and the length cut away is corresponding to the chosen stripping length on the scale previously set (tolerance+/- 2mm)
The minimum blade hardness is 50HRc
The stripping operation can also be carried out at low temperature (-10ºC)
The blade is replaceable by means of a screwdriver
|
