|
Stripping tool for peelable semi-conductive screen
Special tool for the removal of peelable semi-conductive screen on cold stripping MV and HV cables
Technical Characteristics
The set is comprised of the tool itself, a stop-clamp and 100g tube of silicone paste in a plastic case
The tool is safe and easy to use and allows the stripping of semi-conductive layer in different shapes: round stripping, longitudinal stripping and spiral stripping. To facilitate the different operations of positioning, stripping, rotating and removing, the tool is provided with suitable holding points
The direction of the cutting blade (indicated by an arrow) can be adjusted also when the stop-clamp has already been fixed onto the cable
The tool is suitable for cables having diameters from 16 to 41mm
The incision depth can be adjusted from 0 to 0.9mm with 0.1mm steps without the need for additional tooling (max. incision 2mm)
The minimum blade hardness is 52HRc
The blade can be replaced by using a screwdriver. After replacement the position of the incision depth can be adjusted without need of tooling
The start of the longitudinal incision can be done in exact correspondence with the circumferential one
The positioning and fixing of the stop-clamp is assured by the pressure of the built-in spring
|
