Arcus Elecktrotechnik Alois Schiffmann GmBH

Transformer clamps and connection terminals for transformer bushings DT 630 and DT 1000

• Advantageous storage due to universal usage with large cross-sectional ranges.
• Best contact transition conditions and good protection against loosening by additional clamping of threaded connection element.
• Finely serrated connection channel and connection area for improved contact.
• Suitable for 1-2 Cables.

Transformer clamps and connection terminals for transformer bushings DT 630 and DT 1000

• Advantageous storage due to universal usage with large cross-sectional ranges.
• Best contact transition conditions and good protection against loosening by additional clamping of threaded connection element.
• Finely serrated connection channel and connection area for improved contact.
• Suitable for 1-3 Cables.

Transformer clamps and connection terminals for transformer bushings DT 630 and DT 1000

• Advantageous storage due to universal usage with large cross-sectional ranges.
• Best contact transition conditions and good protection against loosening by additional clamping of threaded connection element.
• Finely serrated connection channel and connection area for improved contact.
• Suitable for 1-2 Cables.

Transformer clamps and connection terminals for transformer bushings DT 630 and DT 1000

• Advantageous storage due to universal usage with large cross-sectional ranges.
• Best contact transition conditions and good protection against loosening by additional clamping of threaded connection element.
• Finely serrated connection channel and connection area for improved contact.
• Suitable for 1-2 Cables.

Insulation cover for T-type tap-off clamp

• Protection of exposed terminals against accidental touch.
• Transparent caps enable visual inspection of enclosed connectors.
• Simple installation by pressing.
• Simple disassembly of sealed cable terminals with insulation cover.

Insulation cover for T-type tap-off clamp

• Protection of exposed terminals against accidental touch.
• Transparent caps enable visual inspection of enclosed connectors.
• Simple installation by pressing.
• Simple disassembly of sealed cable terminals with insulation cover.

Technical Information

Cross section [mm²]:
Mains: 16 RE-150 SE
Branch: 2.5-50 RM

Material:
Contact screw (mains): Electrolytic copper, tin-plated
Contact screw (branch): Galvanised steel
Screw head: Plastic glass 214fibre-reinforced
Insulated housing: Plastic glass fibre-reinforced
Connector: Copper alloy, tin-plated

Technical Information

Cross section [mm²]:
1.5-6 RE

Design:
Contact screw: socket screw
Connector barrel: straight through, tin-plated

Design:
Contact screw: socket screw
Connector barrel: straight through, tin-plated

Technical Information

Cross section [mm²]:
Cu 2.5-35 SM / 50 RM(v)
Al 6-35 SM / 50 RM(v)

Design:
Contact screw: shear-head screw unremovable
Connector barrel: with oil-stop, tin-plated

• Tested to IEC 61230.
• Galvanized steel hand screw with circular grooves.
• Copper alloy U-section with notched base (notched clamps may also be used on tubular or round conductors).

Technical Information

Clamping range:
Flat bars: 3-10 mm
Total length [mm]: 290

Material (contact parts): 
Clamp head: copper alloy (tin-plated)
Handle: threaded spindle with hardened conical tip
Clamp head and handle are insulated.

Installation:
The handle is flexible and bendable for use in confined space, e.g. in closed distribution cabinets.
The width of the clamp head of approx. 20 mm requires little space to clamp it to the ground bar.

• Tested to IEC 61230
• This phase clamp is provided with a spindle shaft according to DIN 48 087.
• Construction of phase clamp enables removal of foreign layers (soiling, corrosion) from contact areas.
• Simple and safe clamping to conductor by fastening with screw thread method.

Earthing clamp - with plastic handle for simple and safe installation, and anti-twist groove on cable lug connection

• Tested to IEC 61230.
• Simple and safe installation by screw thread method.

Material:
Contact parts: Aluminium alloy (tin-plated)
Insulation: Polyamid (heat-resistant, impact-proof and shock-resistant)
Connection: Threaded connection for fully-insulated and partinsulated earthing and short-circuiting devices.

Installation:
Safe and simple installation with our fully-insulated earthing handle (Type number 508 145)

Material:
Contact parts: Copper alloy (tin-plated)
Insulation: Polyamid (heat-resistant, impact-proof and shock-resistant)
Connection: Threaded connection for fully-insulated and partinsulated earthing and short-circuiting devices.

Installation:
Safe and simple installation with our fully-insulated earthing handle (Type number 508 145) and our fully-insulated handle for emergency power supply (Type No. 517 001 004)

• Threaded connection for fully insulated part insulated and earthing and short circuiting devices
• Contact parts manufactured from copper alloy (tin-plated)
• Insulation manufactured from a heat-resistant, impact-proof and shock-resistant polyamid

• Threaded connection for fully insulated part insulated and earthing and short circuiting devices
• Contact parts manufactured from copper alloy (tin-plated)
• Insulation manufactured from a heat-resistant, impact-proof and shock-resistant polyamid

• Threaded connection for fully insulated part insulated and earthing and short circuiting devices
• Contact parts manufactured from copper alloy (tin-plated)
• Insulation manufactured from a heat-resistant, impact-proof and shock-resistant polyamid

Technical Information

Material:
Contact parts: Copper alloy (tin-plated)
Insulation: Polyamid (heat-resistant, impact-proof and shock-resistant)
Connection: Threaded connection for fully-insulated and partinsulated earthing and short-circuiting devices.

Installation: 
Safe and simple installation with our fully-insulated earthing handle (Type number 508 145)

Technical Information

Material:
Contact parts: Copper alloy (tin-plated)
Insulation: Polyamid (heat-resistant, impact-proof and shock-resistant)

Connection: 
Threaded connection for fully-insulated and part insulated earthing and short-circuiting devices.

Installation:
Safe and simple installation with our fully-insulated earthing handle (Type number 508 145)

Technical Information

Material:
Contact parts: Copper alloy (tin-plated)
Insulation: Polyamid (heat-resistant, impact-proof and shock-resistant)
Connection: Threaded connection for fully-insulated and partinsulated earthing and short-circuiting devices.

Installation:
Safe and simple installation with our fully-insulated earthing handle (Type number 508 145)

• Threaded connection for fully insulated part insulated and earthing and short circuiting devices
• Contact parts manufactured from copper alloy (tin-plated)
• Insulation manufactured from a heat-resistant, impact-proof and shock-resistant polyamid

Operating rod - for nominal voltages up to 30 kV "Not to be used with precipitation"

• according to VDE 0683 part 1
• wall holder and carrying bag available upon request.
• The rods are manufactured from fibre glass reinforced and smooth epoxy resin tubes.
• The surface is protected by a yellow UV-resistant varnish
• The hand protection disk is made of black rubber material
• The rod end is sealed with a non-slip rubber cap.
• Labels are made of PVC-material, colour yellow, with abrasion resistant printing.

Operating rod - for nominal voltages up to 60 kV "Not to be used with precipitation"

• according to VDE 0683 part 1
• wall holder and carrying bag available upon request.
• The rods are manufactured from fibre glass reinforced and smooth epoxy resin tubes.
• The surface is protected by a yellow UV-resistant varnish
• The hand protection disk is made of black rubber material
• The rod end is sealed with a non-slip rubber cap.
• Labels are made of PVC-material, colour yellow, with abrasion resistant printing.

Operating rod - for nominal voltages up to 110 kV "Not to be used with precipitation"

• according to VDE 0683 part 1
• wall holder and carrying bag available upon request.
• The rods are manufactured from fibre glass reinforced and smooth epoxy resin tubes.
• The surface is protected by a yellow UV-resistant varnish
• The hand protection disk is made of black rubber material
• The rod end is sealed with a non-slip rubber cap.
• Labels are made of PVC-material, colour yellow, with abrasion resistant printing.

Operating rod - for nominal voltages up to 150 kV "Not to be used with precipitation"

• according to VDE 0683 part 1
• wall holder and carrying bag available upon request.
• The rods are manufactured from fibre glass reinforced and smooth epoxy resin tubes.
• The surface is protected by a yellow UV-resistant varnish
• The hand protection disk is made of black rubber material
• The rod end is sealed with a non-slip rubber cap.
• Labels are made of PVC-material, colour yellow, with abrasion resistant printing.

Operating rod - for nominal voltages up to 220 kV "Not to be used with precipitation"

• according to VDE 0683 part 1
• wall holder and carrying bag available upon request.
• The rods are manufactured from fibre glass reinforced and smooth epoxy resin tubes.
• The surface is protected by a yellow UV-resistant varnish
• The hand protection disk is made of black rubber material
• The rod end is sealed with a non-slip rubber cap.
• Labels are made of PVC-material, colour yellow, with abrasion resistant printing.

Operating rod - for nominal voltages up to 380 kV "Not to be used with precipitation"

• according to VDE 0683 part 1
• wall holder and carrying bag available upon request.
• The rods are manufactured from fibre glass reinforced and smooth epoxy resin tubes.
• The surface is protected by a yellow UV-resistant varnish
• The hand protection disk is made of black rubber material
• The rod end is sealed with a non-slip rubber cap.
• Labels are made of PVC-material, colour yellow, with abrasion resistant printing.

• according to VDE 0683 part 1
• wall holder and carrying bag upon request

• according to VDE 0683 part 1
• wall holder and carrying bag upon request

• according to VDE 0683 part 1
• wall holder and carrying bag upon request

• according to VDE 0683 part 1
• wall holder and carrying bag upon request

• according to VDE 0683 part 1
• wall holder and carrying bag upon request

Earthing rod - for nominal voltages above 1 kV

• according to VDE 0683 part 1
• wall holder and carrying bag upon request

Technical Information

Total length [mm]: switchgear specific
Transport length [mm]: switchgear specific
Design: 3-part
Coupling head: bayonet to contact the earthing lance

Technical Information

Total length [mm]: switchgear specific
Transport length [mm]: switchgear specific
Design: 3-part
Coupling head: bayonet to contact the earthing lance