Boddingtons Electrical 30kV Dielectric Safety Boots Class 3 Certified, with a Steel ToeCap and Vulcanized Rubber Sole - UK Size 9/EU Size 43

Not rated yet

A Class 3 AC (EN 50321-1:2018) electrically insulating dielectric boot with an integral steel toe cap. The Workmaster™ Dielectric HV3+ boot allows high voltage live working at up to 26.5kV with every boot tested at 30kV.

  • Lightweight design for increased wearer comfort
  • Low temperature flexibility down to -40ºC
  • Durable, slip resistant vulcanised rubber for maximum grip
  • Energy absorbing tunnel system in heel and ergonomic cushioning insole (removable and machine washable) for greater wearer comfort
  • Cold insulation to EN ISO 20345
  • High-visibility green HV3 compound shaft
  • Meets the requirements of ASTM 1117 (20kV)
  • Also available in a moulded sole version (without fuel & oil resistance, resistance to hot contact or cold insulation for the sole and SRA slip)

Please or to buy this product.
  • SKU
    874906/43

Over 30% of industrial accidents result from slips, trips and falls - as boots are used in an environment where there are liquids present, a slip resistant sole is crucial, which is why we fit a high-performance vulcanised rubber sole to our boots. This provides a number of important benefits:

  • Lightweight design for increased wearer comfort
  • Low temperature flexibility down to -40ºC
  • Durable, slip resistant vulcanised rubber for maximum grip
  • Energy absorbing tunnel system in heel and ergonomic cushioning insole (removable and machine washable) for greater wearer comfort
  • Cold insulation to EN ISO 20345
  • High-visibility green HV3 compound shaft
  • Meets the requirements of ASTM 1117 (20kV)
  • Also available in a moulded sole version (without fuel & oil resistance, resistance to hot contact or cold insulation for the sole and SRA slip)

Boot Shaft 

  • High-visibility green HV3 compound shaft 
  • 200 Joule epoxy coated steel toe cap 
  • Seamless construction 
  • Lightweight design for increased wearer comfort 
  • Low temperature flexibility down to -40℃ 
  • Kick off lug • Extra shin protection 
  • Adjustable height • Ankle guard 
  • Non-wicking knitted nylon lining 
  • REACH Compliant

Boot Sole 

  • Slip resistant vulcanised rubber for maximum grip 
  • Energy absorbing tunnel system in heel and ergonomic cushioning insole (removable & machine washable) for greater wearer comfort 
  • Cold insulation to EN ISO 20345

Care:

  • Machine washable at up to 40℃
  • Shelf life of over 10 years

Options 

  • Additional High DC Voltage test 
  • Removable thermal liner

Certification:

  • Safety Footwear EN ISO 20345:2011 - SB HRO FO E CI SRC
  • Electrically Insulating Footwear EN 50321:2018 Class 3 AC
  • Dielectric Footwear ASTM F1117
  • Personal Protective Equipment PPE DIR 89/686/EEC
  • Sizes Available (UK/EU)
    UK Size 9 - EU Size 43
  • Manufacturer
    Boddingtons Electrical Ltd

Boddingtons Electrical Ltd partner with TNT for our UK consignments. Should you wish for your orders to have shipping notifications you can advise of an email address that we can add to the TNT shipping software to initiate this for your account.

TNT Tracking 

https://www.tnt.com/express/en_gb/site/shipping-tools/tracking.html 

Cut-Off Times

Purchase order placed before 3pm with the item ex-stock can be processed for same day shipment. We do have the flexibility to process orders at a later time but please check with customer services . 

UK Services

  • Standard - 2-3 working days
  • Express - Next-day delivery - by end of business day
  • 12:00 - Next-day delivery - guaranteed by noon
  • 10:00 - Next-day delivery - guaranteed by 10am
  • 9:00 - Next-day delivery - guaranteed by 9am

Minimum Order Value

The minimum order value for carriage paid orders is £250.00 (nett) excluding vat.
We do not have a minimum order value however a carriage charge will be applied depending on the service level chosen.  

Heavier/Dimensional/Large Items - Matting/Cable Guard/StayWire/BodTech 

'Heavier items' including some of the above will incur a shipping charge of £15.00 excluding vat due to there size/dimensions/weight.



EN 50321-1:2018 is the new standard for insulating footwear for live working and was published earlier this year, it replaces EN 50321:1999 and is currently out for approval as an IEC standard which will make it a global standard, not just European.

The main changes in the 2018 revision are the introduction of new 4 classes (see below) for working up to 36 KV (the old standard only went up to Class 0 - 1 KV). Boots are now tested by filling with water instead of ball bearings to simulate water or perspiration potentiality wicking up the lining and creating a flash over. There is also now an electrical test after perforation of the sole by a nail, to ensure boots still give electrical protection after perforation. Even non-metallic perforation inserts can allow water to pass through them so will allow an electrical current to pass when the sole is punctured. The table below lists the classes and the test requirements:

Class RatingMaximum Working VoltageWithstand Test VoltageLeakage Current Test VoltageMaximum Leakage Current
Class 00500V5kV2.5kV3mA
Class 01kV10kV5kV5mA (8mA)
Class 17.5kV20kV10kV10mA (16mA)
Class 217.5kV30kV20kV18mA
Class 326.5kV40kV30kV20mA
Class 436kV50kV40kV24mA

(Overboot requirements are in brackets where they are different from knee high boots)