Boddingtons Electrical 642122, 17,000V, IEC61111, Grey High Voltage Switchboard Rubber Matting, 1200mm Width, 3.00mm Thickness, 20KV Test Voltage, Class 2, Please Specify The Cut Length Required Per Metre

Not rated yet
0

You can purchase this switchboard rubber safety matting by the linear meter, simply measure what you need and select the amount you need. 

Specification

  • Safety Standard IEC 61111 Class 2
  • Test Voltage 20 kV
  • Working Voltage 17kV
  • Width (mm) 1200
  • Thickness (mm) 3.00
  • Flame retardant, oil & acid resistant
  • 17kV electrical switchboard rubber matting is a high quality electrical switchboard matting with a fine ribbed, anti-slip surface pattern on one side and a cloth impression finish on the reverse side 



Please or to buy this product.

Electrical rubber mats should be applied at any point where Operatives are working with high voltage equipment where the risk of electrical shocks is high, including:

  • In front of switchboards
  • In front of machine control gear
  • In plant rooms
  • In lift control gear rooms
  • Portable protection for site engineers working on live equipment 

and need protection from the dangers of electric shock. 

Rubber is known for its exceptional electrical insulating properties. With the ability to reduce or stop electric currents, electrical rubber matting or switchboard matting is a common surface for high voltage environments. Used to protect workers from electrical shocks it is ideal for plant rooms, control rooms, switchboards and places where individuals handle live equipment.

We offer the most extensive and compliant range of Electrical Safety Matting/Switchboard Matting in the UK - IEC61111 (all classes), ASTM D178, BS 921 

Choose with care

Electrical safety mats are made specifically for the purpose of shock prevention and are tested to withstand certain specified voltages, so it is crucial that the right level of protection is allowed for in line with the voltage of the equipment that is being worked on.

Electrical safety matting provides an insulated floor surface to offer increased protection for users from earth contact through the floor. 

When selecting electrical safety matting it is imperative to note the maximum operating voltage relating to each product to ensure it provides adequate protection

Maximum Working Voltage (kV)

This describes the maximum working voltage (kV) a mat can provide protection too. This is safety critical and an essential part of the selection process 

We offer the most extensive and compliant range of Electrical Safety Matting/Switchboard Matting in the UK - IEC61111 (all classes), ASTM D178, BS 921

The European standard IEC 61111:2009 has replaced the national standards of the EU countries and assorts the electrical insulating matting as per its resistance to high tension breakdown into 5 classes.

  • Class 0 - Working voltage: 1 000 V - Proof voltage: 5 000 V -  Withstand voltage: 10 000 V
  • Class 1 - Working voltage: 7 500 V - Proof voltage: 10 000 V - Withstand voltage: 20 000 V
  • Class 2  - Working voltage: 17 000 V - Proof voltage: 20 000 V - Withstand voltage: 30 000 V
  • Class 3 - Working voltage: 26 500 V - Proof voltage: 30 000 V - Withstand voltage: 40 000 V
  • Class 4 - Working voltage: 36 000 V - Proof voltage: 40 000 V - Withstand voltage: 50 000 V

IEC 61111:2009 is applicable to electrical insulating matting made of elastomer for use as a floor covering for the electrical protection of workers on electrical installations. This second edition cancels and replaces the first edition, published in 1992, and its Amendment 1 (2002). This edition constitutes a technical revision. It includes the following significant technical changes with regard to the previous edition:
- general review of the requirements and test provisions;
- modification of the test procedure for slip resistance;
- preparation of the elements of evaluation of defects, and general application of IEC 61318 Ed.3;
- revision of existing annexes;
- deletion of Annexes D and F, not applicable according to IEC 61318 Ed.3;
- introduction of a new normative Annex F on classification of defects


    • Weight
      40000 g
    • SKU
      642122
  • Material and Colour
    Grey Rubber
  • Test Voltage (kV)
    20
  • Width (mm)
    1200
  • Thickness (mm)
    3
  • Weight (kg)
    1.2
  • Maximum Working Voltage (kV)
    17
  • Safety Standard
    IEC61111 Class 2
  • Manufacturer
    Boddingtons Electrical Ltd
  • Please Specify The Cut Length Required Per Metre
    1 Metre, 2 Metre, 3 Metres, 4 Meters, 5 Meters, 6 Metres, 7 Metres, 8 Metres, 9 Metres, 10 Meters (1 Roll), 11 Metres, 12 Metres, 13 Metres, 14 Meteres, 15 Metres, 16 Metres, 17 Metres, 18 Metres, 19 Metres, 20 Metres, 21 Metres, 22 Metres, 23 Metres, 24 Metres, 25 Metres (1 Roll)

Boddingtons Electrical Ltd partner with TNT for our UK consignments. Should you wish for your orders to have shipping notifications you can advise of an email address that we can add to the TNT shipping software to initiate this for your account.

TNT Tracking 

https://www.tnt.com/express/en_gb/site/shipping-tools/tracking.html 

Cut-Off Times

Purchase order placed before 3pm with the item ex-stock can be processed for same day shipment. We do have the flexibility to process orders at a later time but please check with customer services . 

UK Services

  • Standard - 2-3 working days
  • Express - Next-day delivery - by end of business day
  • 12:00 - Next-day delivery - guaranteed by noon
  • 10:00 - Next-day delivery - guaranteed by 10am
  • 9:00 - Next-day delivery - guaranteed by 9am

Minimum Order Value

The minimum order value for carriage paid orders is £250.00 (nett) excluding vat.
Carriage paid orders exclude Timed Services such as 9am/10am/Noon.
We do not have a minimum order value however a carriage charge will be applied depending on the service level chosen.  

Heavier/Dimensional/Large Items - Matting/Cable Guard/StayWire/BodTech 

'Heavier items' including some of the above will incur a shipping charge of £15.00 excluding vat due to there size/dimensions/weight.