Boddingtons Electrical Black High Density Polyethylene (HDPE) Anti-Vandal Cable Guard
- Cable Guard provides excellent protection against vandalism, with a strong balance of rigidity and high impact strength. Cable Guard is designed to protect electrical cables and pipe work on telegraph poles and walls.
- Please note this item is classed as Non-Conveyable , Exceeding Dimensions and Oversize therefore shipping costs reflect the couriers additional charges
| SKU | Internal Diameter ø | Length (m) | Weight | |
|---|---|---|---|---|
|
C18666 | 19 | 3 | 790 |
|
C18680 | 25 | 3 | 840 |
|
C18703 | 38 | 3 | 1140 |
|
C18727 | 50 | 3 | 1420 |
|
C18741 | 64 | 3 | 1600 |
|
C18765 | 80 | 3 | 2000 |
- Protection of vertical/horizontal cable runs on wooden poles, fences, and walls
- Manufactured from HDPE which provides excellent protection against vandalism, and a strong balance of rigidity and high impact strength
- High-density polyethylene or polyethylene high-density is a thermoplastic polymer produced from monomer ethylene. HDPE has proven to be a stronger, more stable material than most plastics, wood, and even metal. It's impact-resistant, so it can stand up to the pressures and elements of your facility. ... HDPE won't scratch or dent, so you don't have to have replacements on-hand
- Can also be used to protect other utility supplies on walls i.e. gas, oil, water
- Supplied with screw fixing holes for easy installation
- Lightweight and easily transported
- With UV and flame retardant additives
Polyethylene for Molding Applications
General-purpose HDPE resin, characterized by very easy processability.
An excellent balance of rigidity and impact strength and good ESCR
General Properties | Test Method (Based On) | Unit | Typical Value |
Melt Index (2.16 kg) | ASTM D 1238 | g/10 min | 0.3 |
Melt index (21.6 kg) | ASTM D 1238 | g/10 min | 29 |
Density | ASTM D1928/D1505 | g/cm³ | 0.954 |
Vicat Softening point (DSC) | ASTM D 1525 | ̊C | 128 |
Mechanical Properties | |||
1% Secant Modulus | ASTM D638/ISO R527 | MPa | 1150 |
Tensile at Yield | ASTM D638/ISO R527 | MPa | 28 |
Tensile Strength at Break | ASTM D638/ISO R527 | MPa | 30 |
Elongation at Break | ASTM D638/ISO R527 | % | >600 |
Izod Impact | ISO180-4A | kJ/m² | 18 |
Shore Hardness – D | ASTM D 2240 | 67 | |
ESCR (F50 10% Lgepal) | ASTM D 746 | ̊C | -75 |
ESCR (F50 100% Lgepal) | ASTM 1693 | h | 40 |
ASTM 1693 | h | 90 |
Flame retardant additive
Flame retardant masterbatch developed to fulfil the requirements of most commonly used international standards describing flames retardant injection moulded articles, films or tapes.
PolyBatch ®PR 50 NP:
Is used as a general-purpose masterbatch for applications such as blown film, pipe extrusion, and injection moulding of LDPE and LLDPE.
The mass-temperature should be kept below 220 ̊C.
Physical Properties
Base Resin | PE |
Melt Index (190/2,16; g/10 min | 43 |
Specific Gravity (g./cm_) | 1.35 |
Bulk Density (g./1) | 770 |
Moisture Content (ppm) | <1500 |