• Designed to be worn over Electrician's Gloves for mechanical protection
• Protects in dirty or oily environments
• Extends the lifespan of Electrician's Gloves
• Offers a higher level of grip
• Standards: EN 420 / EN 388 (with mechanical strength: 
• Performance Level - Mechanical Hazards
  
  

Length

• Size 8 295mm 
• Sizes 9, 10 and 11 are 315mm
  
  
  

Please note the image is just demonstrating application usages as the glove does not come with a buckle

Designed to be worn over Insulating Gloves to enhance their mechanical strength and, therefore, increase their service life and durability. Leather protectors have no electrical insulating properties of their own and must be worn in conjunction with insulating gloves. 

Sizing: You should order the same size leather protector as insulating glove. i.e. If you wear a size 10 insulating glove you should use a size 10 protector. As with insulating gloves, size is given directly as the circumference of your hand in inches. The part number for each glove ends in “xx” which is the glove size e.g.  08, 09, 10, 11, 12

User Information Glove care: To get the best service from your gloves ensure that after use all contaminant is removed. Storage: store in dry conditions away from direct sunlight and heat. You are advised to retain this packaging for reference. Note: should not be worn where there is a risk of entanglement with moving machinery. 

Warning: these gloves are designed to provide protection to the electricians gloves; they do not in themselves provide any level of electrical insulation or protection and should never be used for electrical work on their own. They should also not be used in damp or wet conditions