Boddingtons Electrical FBS Cable Stripper for Vulcanized Semiconductive Layer Kit
Boddingtons Electrical FBS Cable Stripper for Vulcanized Semiconductive Layer for Bonded Semi Conductive Screen Set
- Optimized for MV and HV cable prep, especially for semiconductive shielding in vulcanized/bonded layers.
- Offers precise depth control (step cuts or spiral) for clean stripping without damaging the semicon surface.
| SKU | Application Range Ø | Insulation Thickness | Application | Each Weight (g) | |
|---|---|---|---|---|---|
|
244710 | 10 - 52 mm | 0 - 1,5 mm | Vulcanized, extruded, bonded semiconductive layer | 1120 |
Key Features
- Vice‑style clamping securely grips cable during stripping
- Bidirectional axial feed: From outside inwards you leave ~25 mm of semicon; from inside outwards,
- Full-stripping anywhere along the cable’s length, accommodating mid‑span operations
- Max rotation diameter is 200 mm, suitable for large cables
- Interchangeable blade, spare available (spare blade 244701, part kit)
- Not for live‑voltage work—strictly uninsulated mechanical device
SET Equipment
- 1 x 244700 x FBS Cable Stripper
- 1 x 2,5 mm Allen wrench
- 1 x 244702 Tube of Silicone Grease
- 1 x 128930 Rigid plastic case
Technical Characteristics
- Positioning on the cable through vice system
- Begin stripping can be done from any position on the cable
- Axial feed activation/deactivation device, both directions possible (outside -> inside: 25mm layer remains, inside -> outside: 6mm of layer remains)
- Lightweight, durable design due to the use of light metals, surface anodized
- Optimal sliding properties due to coated contact surfaces
- Interchangeable blade
- Rotation enables to work on limited space
- Perfect circular cut
- Step by step depth adjustement (with locking possibility)
- 235 x 200 x 55 mm
