Technical characteristics: 

• Application Range Ø 16 - 41 mm 
• Insulation Thickness 0 - 2 mm
• To strip the non-vulcanized semiconductive layer of MV cables 
• Longitudinal, helical and circular cuts
•  Positioned on the cable comparable to a vice system 
• Stop clamp to limit the stripping length 
• Gradually depth adjustment 
• Maximal rotating diameter 130 mm 
• The positioning of the stripper and holding of stops-clamp is assured by the pressure of the spring 
• The incision depth can be adjusted from 0 to 0,9 mm with 0,1 mm steps each by turning the corresponding knob 
• The start of longitudinal incision can be done in exact correspondence with the circumferential incision.