Boddingtons Electrical HLS Cable Stripper Set for Non-Vulcanized Semiconductive Layer
Boddingtons Electrical HLS Cable Stripper Set for Non-Vulcanized Semiconductive Layer
Intended specifically for removing peelable (non-vulcanized) semiconductive layers on medium-voltage cables
| SKU | Application Range Ø | Insulation Thickness | Maximal Rotating Diameter | Each Weight (g) | |
|---|---|---|---|---|---|
|
244400 | 16 - 41 mm | 0 - 2 mm | 130 mm | 0 |
Cable Stripper for Non-Vulcanized Semiconductive Layer
- Cable diameter: 16 – 41 mm
- Insulation thickness: up to 2 mm
- Maximum rotating diameter: 130 mm
- Depth control: Adjustable incision depth from 0 to 0.9 mm, in 0.1 mm increments
- Cut types supported: longitudinal, helical, and circular cuts
- Positioning: Clamped via a vice-like mechanism, with a stop clamp to limit strip length
- Design: Suitable for use in tight spaces due to reduced rotation requirements; offers precise control and avoids damage to inner layers
Technical Characteristics
- Longitudinal, helical and circular cuts
- Positioning on the cable through vice system
- Stop clamp to limit the stripping length
- Step-by-step depth adjustment
- The incision depth can be adjusted from 0 to 0,9 mm with 0,1 mm trips
- The start of longitudinal incision can be done in exact correspondence with the circumferential one
- Reduced rotation enables to work on limited space
- Perfect precise circular cut
- No incisions on surface below
 |  |  |  |