 |
CATU MO-286 Arc-Flash Face Shield with Headband for Electrician
Standards
Arc flash GS-ET-29 APC 1 EN 166/EN 170 2C-1.2 CATU 1 B 8-1-0 3 ANSI Z 87.1
An arc-flash face shield is a piece of personal protective equipment (PPE) designed to protect the face and eyes from the hazardous energy released during an arc flash. An arc flash is a type of electrical explosion or discharge that results from a low-impedance connection to ground or another voltage phase in an electrical system. This phenomenon can produce very high temperatures, a bright flash, and a pressure wave that can cause significant injury or even death.
| SKU | Arc Protection Class | Anti-Scratch | Anti-Fogging | Screen Height (mm) | Pack Size | Each Weight (g) | |
|---|---|---|---|---|---|---|---|
|
MO-286 | APC 1 | Yes | Yes | 205 | Each | 680 |
Application:
- Protective face shield against thermal effect of short-circuit electric arcs.
- To wear without helmet.
- Head adjustment by a ratchet.
Features:
- Anti-scratch and anti-fogging treatments.
- Screen height: 20,5 cm.
An arc flash is a type of electrical explosion or discharge that results from a low-impedance connection to ground or another voltage phase in an electrical system. This phenomenon can produce very high temperatures, a bright flash, and a pressure wave that can cause significant injury or even death.
Arc-flash face shields are made of materials that can withstand the extreme conditions produced by an arc flash, including high temperatures, intense light, and flying debris. They are typically used in combination with other protective gear, such as arc-rated clothing, gloves, and head protection, to provide comprehensive protection against the hazards of arc flash incidents.
These face shields are rated based on their ability to protect against a certain level of thermal energy, measured in calories per square centimeter (cal/cm^2). The ratings help users select the appropriate level of protection for the specific electrical tasks they are performing, in accordance with safety standards such as the National Fire Protection Association (NFPA) 70E, "Standard for Electrical Safety in the Workplace."
In addition to their protective capabilities, arc-flash face shields are designed to offer clear visibility and comfort, allowing workers to perform their tasks without undue interference. They often feature adjustments for fit, as well as coatings or treatments to prevent fogging and scratching, enhancing their usability and effectiveness as a critical component of electrical safety PPE.
