Insulated jointing tools are essential hand tools used in the electrical and telecommunications industries for safely connecting and splicing electrical cables or conductors. These tools are designed to provide insulation and protection from electrical shock, ensuring that technicians can work on live or potentially live systems with minimal risk of injury.

Insulated jointing tools are particularly critical in high-voltage environments where electrical hazards are prevalent. The insulation on the tools helps protect workers from accidental contact with live wires, as well as improving their overall safety when working with electrical systems.

A Circuit Breaker Lockout Slide & Pin is a safety device used to ensure that a circuit breaker remains in the off position and cannot be turned back on accidentally or until the lockout device is removed. This is a critical component in electrical safety, particularly in industrial and construction settings where controlling the flow of electrical power is necessary to prevent accidents and ensure worker safety

A Safety Padlock used in Lockout/Tagout (LOTO) procedures is a specialized lock designed to ensure that equipment is kept off and securely isolated from energy sources during maintenance or repair work. LOTO procedures are critical safety measures in industrial and commercial environments, aiming to protect workers from the unexpected energization or startup of machinery and equipment, or the release of hazardous energy during service or maintenance activities.

The Group Lock Box is an essential tool in complex LOTO procedures involving multiple personnel, ensuring that all maintenance work is carried out safely and efficiently.

Standards

IEC 61482-2 APC 1 & ATPV 12 cal/cm² ISO 11612 A B1 C1 F1 ISO 11611 class 1 EN 1149-5 
NFPA 70E - ASTM F1959

CATU AFG-1001 Multi-Risk Arc Flash Full Coveralls

are specially designed protective clothing for workers exposed to the risk of arc flashes and other electrical hazards. These coveralls are part of a broader range of arc flash and electrical safety personal protective equipment (PPE) intended to minimize the risk of injury in high-risk electrical environments.

CATU AFGBELT Arc-Flash Belt

is a protective accessory designed for electricians and professionals working in environments with electrical hazards. It complements arc flash protective clothing by providing additional safety without compromising the garment's protective capabilities.

CATU CC-16X Series Unipolar Voltage Detectors for Elbow Connectors with Capacitive Dividers

The CATU CC-16X Series Unipolar Voltage Detectors for Elbow Connectors with Capacitive Dividers are safety devices typically used for testing and detecting high voltage on electrical systems, particularly in medium-voltage networks. These detectors are designed for use with elbow connectors, which are commonly found in medium-voltage cable systems, and they utilise capacitive dividers to ensure accurate detection of voltage.

Application:

• Lightweight and stable 3-panel intervention barrier, used to temporarily fence off and delimit a work area inside a building.
• Material : 100% polyester fabric, fluorescent yellow, prohibition pictogram.

Standards

EN 20345

ST HTA 70 A (RTE SERECT) ASTM F2413:2018 (18 kV / 1 mn)

The CATU AL-214 Universal Button Protective Cover is a device designed to provide safety for electrical buttons and controls. It is used primarily in environments where electrical equipment needs to be shielded from accidental activation, dirt, moisture, or environmental hazards.

CATU CZ-55 Life Saving Kit for Substations

The CATU CZ-55 Life Saving Kit is a comprehensive safety solution designed for rapid response in high-voltage substation environments, particularly those operating up to 36 kV. This kit ensures that first responders have immediate access to essential tools required to assist victims of electrical accidents safely. By equipping substations with the CATU CZ-55 Life Saving Kit, facility operators can enhance their preparedness for electrical emergencies, ensuring both the safety of their personnel and the reliability of their operations. 

Standards

NF EN 20345

ST HTA 70 A (RTE SERECT) ASTM F2413:2018 (18 kV / 1 mn)

SB P WRU HRO SRC

Application :

• Provision for lockout on low-voltage electrical works in application of the safety requirements of standard NF C 18-510.
  
  

Composition :

• 1 Carrying bag M-87292.
• 1 Padlock with Ø 4 mm insulated shackle PP-4-38-R-Z.
• 1 Padlock with Ø 6 mm insulated shackle PP-6-38-R-Z.
• 1 Multiple locker AL-205.
• 1 Hasp ALM-6/25.
• 1 Non-conductive slider hasp with Ø 3 mm flexible shackle ALP-4/3.
• 2 Small circuit breaker lockout (with mini padlock) AL-201/C1.
• 2 Medium model circuit breaker lockout AL-208-D.
• 1 Slide&Pin circuit breaker lockout AL-210.
• 1 Multiple circuit breaker lockout large model AL-209-L.
• 1 set of 10 Tag-Out badges AP-460.

Non-conductive plastic folding rulers are measuring tools designed for use in environments where electrical safety is a concern. These rulers are made from materials that do not conduct electricity, making them safe to use around live electrical components and circuits.

An Electrical Rescue Carrying Kit is essential for ensuring safety and preparedness during electrical emergencies.

Storage and Maintenance:

• Durable Carrying Case: Waterproof and rugged for easy transport and protection.
• Regular Checks: Ensure all items are in working order and replace any expired supplies.

Training:

• Safety Training: Regular training on how to use the kit effectively and safely.

This kit can be crucial for first responders or individuals working in environments where electrical hazards may occur. Always prioritize safety and follow local regulations and guidelines.