Boddingtons Electrical 642303, 450V, Black Ribbed Low and High Voltage Switchboard Rubber Matting, 1220mm Width, 6.00mm Thickness, 11kV Test Voltage, Please Specify The Cut Length Required Per Metre

Not rated yet
0

You can purchase this switchboard rubber safety matting by the linear meter, simply measure what you need and select the amount you need.

Specification

  • Test Voltage 11 kV
  • Working Voltage 0.45kV
  • Width (mm) 1220
  • Thickness (mm) 6.00
  • Standard Roll Length (m) 11.5
  • Compression Set(22 Hours @ 70°C) 15 %
  • Elongation at Break 230 % 
  • Highest Recommended Working Temperature 70 °C 
  • Intermittent Working Temperature 90 °C 
  • Lowest Recommended Working Temperature -20 °C 
  • Shore Hardness (Shore A) 65 ° Shore
  • Specific Gravity 1.58 g/cm
  • Tensile Strength 3 MPA
  • 450V electrical switchboard rubber matting is a high quality electrical switchboard matting with a fine ribbed, anti-slip surface pattern on one side and a cloth impression finish on the reverse side 

Please or to buy this product.

Electrical rubber mats should be applied at any point where Operatives are working with high voltage equipment where the risk of electrical shocks is high, including:

  • In front of switchboards
  • In front of machine control gear
  • In plant rooms
  • In lift control gear rooms
  • Portable protection for site engineers working on live equipment 

and need protection from the dangers of electric shock. 

Rubber is known for its exceptional electrical insulating properties. With the ability to reduce or stop electric currents, electrical rubber matting or switchboard matting is a common surface for high voltage environments. Used to protect workers from electrical shocks it is ideal for plant rooms, control rooms, switchboards and places where individuals handle live equipment.

We offer the most extensive and compliant range of Electrical Safety Matting/Switchboard Matting in the UK - IEC61111 (all classes), ASTM D178, BS 921 

Choose with care

Electrical safety mats are made specifically for the purpose of shock prevention and are tested to withstand certain specified voltages, so it is crucial that the right level of protection is allowed for in line with the voltage of the equipment that is being worked on.

Electrical safety matting provides an insulated floor surface to offer increased protection for users from earth contact through the floor. 

When selecting electrical safety matting it is imperative to note the maximum operating voltage relating to each product to ensure it provides adequate protection

Maximum Working Voltage (kV)

This describes the maximum working voltage (kV) a mat can provide protection too. This is safety critical and an essential part of the selection process 


    • Weight
      40000 g
    • SKU
      642303
    • HS Commodity Codes
      40082110
  • Material
    Black Ribbed
  • Test Voltage (kV)
    11
  • Width (mm)
    1220
  • Thickness (mm)
    6
  • Weight (kg)
    12
  • Maximum Working Voltage (kV)
    0.45
  • Manufacturer
    Boddingtons Electrical Ltd
  • Please Specify The Cut Length Required Per Metre
    1 Metre, 2 Metres, 3 Metres, 4 Meters, 5 Metres, 6 Metres, 7 Metres, 8 Metres, 9 Metres, 10 Metres, 11.5 Metres (1 Roll)

Boddingtons Electrical Ltd partner with TNT for the majority of our UK Mainland, Ireland, Northern Ireland and Channel Islands consignments. Should you wish for your orders to have shipping notifications you can advise of an email address that we can add to the TNT shipping software to initiate this for your account.

TNT Tracking 

You can use the link below to trace your order once a tracking number has been sent to you via email.

https://www.tnt.com/express/en_gb/site/shipping-tools/tracking.html

Cut-Off Times

A purchase order placed before 1 pm with the item ex-stock can be processed for same day shipment. We do have the flexibility to process orders at a later time but please check with customer services . 

Services Levels Summary

UK Mainland Services

  • Standard - 2-3 working days , untimed service - by end of business day. 
  • Express - Next-day working delivery, untimed service - by end of business day. 
  • 12:00 - Next-day delivery - guaranteed by noon - (Delivery by 12am next working day throughout most of the UK Mainland: Delivery are not guaranteed but currently enjoy a very high success rate. We do not offer any refunds on compensation for timed services) 
  • 10:00 - Next-day delivery - guaranteed by 10am  - (Delivery by 10am next working day throughout most of the UK Mainland: Delivery are not guaranteed but currently enjoy a very high success rate. We do not offer any refunds on compensation for timed services) 
  • 9:00 - Next-day delivery - guaranteed by 9am - (Delivery by 9am next working day throughout most of the UK Mainland: Delivery are not guaranteed but currently enjoy a very high success rate. We do not offer any refunds on compensation for timed services) 

Channels Islands

  • Standard - 3-4 working days , untimed service - by end of business day.

Northern Ireland

  • Standard - 2-3 working days , untimed service - by end of business day. 
  • Express - Next-day working delivery, untimed service - by end of business day. 

Pallet Services

Our electrical switchboard matting is considerably heavy and can only be shipped via a third party pallet service. Unfortunately we cannot offer tracking information when using this service level. Any orders over a 40Kg will automatically be sent on a pallet service

Minimum Order Value

The minimum order value for carriage paid orders is £250.00 (nett) excluding vat.

Carriage paid orders exclude Timed Services such as 9am/10am/Noon.

Our minimum order level is £30.00 and maybe subject to a minimum order value of £10.00 excl vat however a carriage charge will be applied depending on the service level chosen.  

Export Customers

For all non UK mainland customers we quote Ex-Works (EXW).

EXW means that the seller has delivered when they place or deliver suitably packaged goods at the disposal of the buyer at an agreed-upon place (i.e. the works, factory, warehouse, etc.). The goods are not cleared for export.

The seller is not required to load the goods onto a collecting vehicle and, if they do, it is at the buyer’s expense. EXW is the only Incoterm where the goods are not required to be cleared for export, although the seller has the duty to assist the buyer (at the buyer’s expense) with any needed documentation and export approvals.

After collection, the buyer must provide the seller with proof that they collected the goods. From collection, the buyer is responsible for all risks, costs and clearances.

Our online payments are processed by Worldpay

Boddingtons Electrical Ltd take your security very seriously. Utilising a high level of encryption, all financial transactions on this site are processed by Worldpay. At the payment stage of check-out, you will be securely transferred to Worldpay's encrypted server to complete your payment. If your card is enrolled in either the "3D Secure" or "Verified by Visa" schemes, you will be also be referred to MasterCard or Visa to complete this enhanced level of security. Your card details are never made available to us and no payment information is ever stored on our servers - you can shop in complete confidence!

Card payments are only accepted from UK customers only.

Alternatively you can arrange to make a BACS payment , in which this detail will be provided on our proforma invoice. This option is available to UK customers and for Export customers.