Arc Flash Gloves

When working in an high risk environment your hands are especially vulnerable to the energy of an arc flash. This is why it is imperative that employees are protected correctly when working in high voltage areas. Our range of arc flash gloves are certified and made with the highest quality materials. They are especially suited for switching operations, for the measurement and test work, the insertion of isolating protective plates or the activation of fuses. The HRC and ATPV are determined through a flash hazard analysis that studies all the electrical circuit in the device capable of being energised and determines the amount of energy released in case of an arc flash .

Products: 113 of 13
  • ProGARM 2678 Arc Flash Gloves, Flame Resistant Nomex, Arc Rated 50cal/cm2 (ARC 4)

    High-performance Kevlar lined Arc Flash gloves with 100% waterproof and windproof lining to keep hands warm and dry. Insulation made with Flame Resistant Nomex. Arc Rated 50cal/cm2 (ARC 4).

    Not rated yet
    Please or to buy this product.
  • ProGARM 2700 Arc Flash Khaki Gloves, Neoprene and Natural Rubber, Category 2, 8.6cal

    ProGARM 2700 Arc flash gloves coated with Neoprene and Natural Rubber for excellent comfort, grip and flexibility. Providing the wearer with A4/Cut 5/Level D resistance as well as heat and Arc Flash protection. Suitable for a number of high-risk environments.

    • ANSI CUT F2992 Cut Level A4 Taber Abrasion Level 3
    • Tested to EN 388:2003 Cut Level 5
    Not rated yet
    Please or to buy this product.
  • Boddingtons Electrical Arc Flash, Composite Flash & Grip Natural Rubber Safety Gloves, 500 Max Working Voltage, Class 00, Length 360mm, Category RC, 26.3 cal/cm², Sizes 6-12

    • Electrical Glove Testing

    Bicolor composite gloves available in many sizes and different lengths. Integrated mechanical protection: no need of leather protector. Arc flash rated by a third party notified body: box test and ATPV 

    Natural rubber gloves with specially formulated external coating in high-performance orange red elastomer, black inner coating, cut edges, length 41 cm. Sizes 6 to 12. Special proper ties (category) RC, with mechanical protection. Arc Flash assessed by a notified body: box test and ATPV.

    Three-in-one gloves combining dielectric, mechanical and thermal (arc flash) resistance. Specially formulated outer coating that provides exceptional grip, even in humid or greasy conditions.

    Standard

    EN 60903:2003 - IEC 60903:2014 PPE Category III (Directive 89/686/EEC) IEC 61482-1-2 ASTM F2675

    Use

    Composite insulating gloves with integrated mechanical protection and arc flash rating.

    Testing

    Gloves are tested and certified to EN 60903 and IEC 60903

    No gloves of classes 1, 2, 3 and 4, not even those held in storage, should be use unless they have been tested within a maximum period of 6 months. . However they do need testing every six months. The tests should include air inflation to check for leaks (using our pneumatic glove tester), a visual inspection while pressurized and a dielectric test in accordance with EN60903 standards of live working gloves of insulating material.

    From the annex E (informative) of the EN-60903 standard 

    Typical Industries

    • Automotive
    • Electronics
    • Logistics and Warehousing
    • Machinery and Equipment
    • Mining
    • Public Utilities
    Not rated yet
    Please or to buy this product.
  • Oberon TCG100-GLOVE TCG100™ Series Ultralight Arc Flash Category 4+ Gloves, 100 cal/cm2

    • Exclusive Distributor

    Arc flash gloves are made from a lightweight and durable Aramid fabric and are the perfect solution for thermographers or any electrical worker that needs arc flash protection for their hands.

    • Meets ANSI /ISEA 125 Level 2 Conformity and Arc Flash PPE Category 4+ standards with an arc rating of 100 cal/cm2. Please refer to NFPA 70E or CSA Z462 Standards for specific selection requirements. 
    • Arc flash gloves are made from a lightweight and durable Aramid fabric and are the perfect solution for thermographers or any electrical worker that needs arc flash protection for their hands.
    • Color Black
    • Made in the USA
    Not rated yet
    Please or to buy this product.
  • Oberon TCG25-GLOVE TCG25™ Series Ultralight Arc Flash Category 3 Gloves, 27 cal/cm2

    • Exclusive Distributor

    Arc flash gloves are made from a lightweight and durable Aramid fabric and are the perfect solution for thermographers or any electrical worker that needs arc flash protection for their hands.

    • Colour Black
    • Made in the USA
    Not rated yet
    Please or to buy this product.
  • Oberon TCG40-GLOVE TCG40™ Series Ultralight Arc Flash Category 4 Gloves, 46 cal/cm2

    • Exclusive Distributor
    • Meets ANSI /ISEA 125 Level 2 Conformity and Arc Flash PPE Category 4 standards with an arc rating of 46 cal/cm2. Please refer to NFPA 70E or CSA Z462 Standards for specific selection requirements. 
    • Arc flash gloves are made from a lightweight and durable Aramid fabric and are the perfect solution for thermographers or any electrical worker that needs arc flash protection for their hands.
    • Colour Black
    • Made in the USA
    Not rated yet
    Please or to buy this product.
  • Oberon TCG65-GLOVE TCG65™ Series Ultralight Arc Flash Category 4+ Gloves, 76 cal/cm2

    • Exclusive Distributor
    • Meets ANSI /ISEA 125 Level 2 Conformity and Arc Flash PPE Category 4+ standards with an arc rating of 76 cal/cm2. Please refer to NFPA 70E or CSA Z462 Standards for specific selection requirements. 
    • Arc flash gloves are made from a lightweight and durable Aramid fabric and are the perfect solution for thermographers or any electrical worker that needs arc flash protection for their hands.
    • Colour Black
    • Made in the USA
    Not rated yet
    Please or to buy this product.
  • Boddingtons Electrical Arc Flash, Composite Flash & Grip Natural Rubber Safety Gloves, 1000 Max Working Voltage, Class 0, Length 410mm, Category RC, 71.6 cal/cm², Sizes 6-12

    • Electrical Glove Testing

    Bicolor composite gloves available in many sizes and different lengths. Integrated mechanical protection: no need of leather protector. Arc flash rated by a third party notified body: box test and ATPV 

    Natural rubber gloves with specially formulated external coating in high-performance orange red elastomer, black inner coating, cut edges, length 41 cm. Sizes 6 to 12. Special proper ties (category) RC, with mechanical protection. Arc Flash assessed by a notified body: box test and ATPV.

    Three-in-one gloves combining dielectric, mechanical and thermal (arc flash) resistance. Specially formulated outer coating that provides exceptional grip, even in humid or greasy conditions.

    Standard

    EN 60903:2003 - IEC 60903:2014 PPE Category III (Directive 89/686/EEC) IEC 61482-1-2 ASTM F2675

    Use

    Composite insulating gloves with integrated mechanical protection and arc flash rating.

    Testing

    Gloves are tested and certified to EN 60903 and IEC 60903

    No gloves of classes 1, 2, 3 and 4, not even those held in storage, should be use unless they have been tested within a maximum period of 6 months. . However they do need testing every six months. The tests should include air inflation to check for leaks (using our pneumatic glove tester), a visual inspection while pressurized and a dielectric test in accordance with EN60903 standards of live working gloves of insulating material.

    From the annex E (informative) of the EN-60903 standard 

    Typical Industries

    • Automotive
    • Electronics
    • Logistics and Warehousing
    • Machinery and Equipment
    • Mining
    • Public Utilities
    Not rated yet
    Please or to buy this product.
  • Boddingtons Electrical Arc Flash, Composite Flash & Grip Natural Rubber Safety Gloves, 7500 Max Working Voltage, Class 1, Length 410mm, Category RC, 42.2 cal/cm², Sizes 7-12

    • Electrical Glove Testing

    Bicolor composite gloves available in many sizes and different lengths. Integrated mechanical protection: no need of leather protector. Arc flash rated by a third party notified body: box test and ATPV 

    Natural rubber gloves with specially formulated external coating in high-performance orange red elastomer, black inner coating, cut edges, length 41 cm. Sizes 6 to 12. Special proper ties (category) RC, with mechanical protection. Arc Flash assessed by a notified body: box test and ATPV.

    Three-in-one gloves combining dielectric, mechanical and thermal (arc flash) resistance. Specially formulated outer coating that provides exceptional grip, even in humid or greasy conditions.

    Standard

    EN 60903:2003 - IEC 60903:2014 PPE Category III (Directive 89/686/EEC) IEC 61482-1-2 ASTM F2675

    Use

    Composite insulating gloves with integrated mechanical protection and arc flash rating.

    Testing

    Gloves are tested and certified to EN 60903 and IEC 60903

    No gloves of classes 1, 2, 3 and 4, not even those held in storage, should be use unless they have been tested within a maximum period of 6 months. . However they do need testing every six months. The tests should include air inflation to check for leaks (using our pneumatic glove tester), a visual inspection while pressurized and a dielectric test in accordance with EN60903 standards of live working gloves of insulating material.

    From the annex E (informative) of the EN-60903 standard 

    Typical Industries

    • Automotive
    • Electronics
    • Logistics and Warehousing
    • Machinery and Equipment
    • Mining
    • Public Utilities
    Not rated yet
    Please or to buy this product.
  • Boddingtons Electrical Arc Flash, Composite Flash & Grip Natural Rubber Safety Gloves, 17000 Max Working Voltage, Class 2, Length 410mm, Category RC, 74.5 cal/cm², Sizes 7-12

    • Electrical Glove Testing

    Bicolor composite gloves available in many sizes and different lengths. Integrated mechanical protection: no need of leather protector. Arc flash rated by a third party notified body: box test and ATPV 

    Natural rubber gloves with specially formulated external coating in high-performance orange red elastomer, black inner coating, cut edges, length 41 cm. Sizes 6 to 12. Special proper ties (category) RC, with mechanical protection. Arc Flash assessed by a notified body: box test and ATPV.

    Three-in-one gloves combining dielectric, mechanical and thermal (arc flash) resistance. Specially formulated outer coating that provides exceptional grip, even in humid or greasy conditions.

    Standard

    EN 60903:2003 - IEC 60903:2014 PPE Category III (Directive 89/686/EEC) IEC 61482-1-2 ASTM F2675

    Use

    Composite insulating gloves with integrated mechanical protection and arc flash rating.

    Testing

    Gloves are tested and certified to EN 60903 and IEC 60903

    No gloves of classes 1, 2, 3 and 4, not even those held in storage, should be use unless they have been tested within a maximum period of 6 months. . However they do need testing every six months. The tests should include air inflation to check for leaks (using our pneumatic glove tester), a visual inspection while pressurized and a dielectric test in accordance with EN60903 standards of live working gloves of insulating material.

    From the annex E (informative) of the EN-60903 standard 

    Typical Industries

    • Automotive
    • Electronics
    • Logistics and Warehousing
    • Machinery and Equipment
    • Mining
    • Public Utilities
    Not rated yet
    Please or to buy this product.
  • Boddingtons Electrical Arc Flash, Composite Flash & Grip Natural Rubber Safety Gloves, 26500 Max Working Voltage, Class 3, Length 410mm, Category RC, 73.2 cal/cm², Sizes 8-12

    • Electrical Glove Testing

    Bicolor composite gloves available in many sizes and different lengths. Integrated mechanical protection: no need of leather protector. Arc flash rated by a third party notified body: box test and ATPV 

    Natural rubber gloves with specially formulated external coating in high-performance orange red elastomer, black inner coating, cut edges, length 41 cm. Sizes 6 to 12. Special proper ties (category) RC, with mechanical protection. Arc Flash assessed by a notified body: box test and ATPV.

    Three-in-one gloves combining dielectric, mechanical and thermal (arc flash) resistance. Specially formulated outer coating that provides exceptional grip, even in humid or greasy conditions.

    Standard

    EN 60903:2003 - IEC 60903:2014 PPE Category III (Directive 89/686/EEC) IEC 61482-1-2 ASTM F2675

    Use

    Composite insulating gloves with integrated mechanical protection and arc flash rating.

    Testing

    Gloves are tested and certified to EN 60903 and IEC 60903

    No gloves of classes 1, 2, 3 and 4, not even those held in storage, should be use unless they have been tested within a maximum period of 6 months. . However they do need testing every six months. The tests should include air inflation to check for leaks (using our pneumatic glove tester), a visual inspection while pressurized and a dielectric test in accordance with EN60903 standards of live working gloves of insulating material.

    From the annex E (informative) of the EN-60903 standard 

    Typical Industries

    • Automotive
    • Electronics
    • Logistics and Warehousing
    • Machinery and Equipment
    • Mining
    • Public Utilities
    Not rated yet
    Please or to buy this product.
  • Boddingtons Electrical Arc Flash, Composite Flash & Grip Natural Rubber Safety Gloves, 36000 Max Working Voltage, Class 4, Length 410mm, Category RC, 87.7 cal/cm², Sizes 8-12

    • Electrical Glove Testing

    Bicolor composite gloves available in many sizes and different lengths. Integrated mechanical protection: no need of leather protector. Arc flash rated by a third party notified body: box test and ATPV 

    Natural rubber gloves with specially formulated external coating in high-performance orange red elastomer, black inner coating, cut edges, length 41 cm. Sizes 6 to 12. Special proper ties (category) RC, with mechanical protection. Arc Flash assessed by a notified body: box test and ATPV.

    Three-in-one gloves combining dielectric, mechanical and thermal (arc flash) resistance. Specially formulated outer coating that provides exceptional grip, even in humid or greasy conditions.

    Standard

    EN 60903:2003 - IEC 60903:2014 PPE Category III (Directive 89/686/EEC) IEC 61482-1-2 ASTM F2675

    Use

    Composite insulating gloves with integrated mechanical protection and arc flash rating.

    Testing

    Gloves are tested and certified to EN 60903 and IEC 60903

    No gloves of classes 1, 2, 3 and 4, not even those held in storage, should be use unless they have been tested within a maximum period of 6 months. . However they do need testing every six months. The tests should include air inflation to check for leaks (using our pneumatic glove tester), a visual inspection while pressurized and a dielectric test in accordance with EN60903 standards of live working gloves of insulating material.

    From the annex E (informative) of the EN-60903 standard 

    Typical Industries

    • Automotive
    • Electronics
    • Logistics and Warehousing
    • Machinery and Equipment
    • Mining
    • Public Utilities
    Not rated yet
    Please or to buy this product.
  • Oberon TCG140-M3F TCG140™ Series Ultralight Arc Flash Gloves, Category 4+, 140 cal/cm2

    • Exclusive Distributor

    Arc flash gloves are made from a lightweight and durable Aramid fabric and are the perfect solution for thermographers or any electrical worker that needs arc flash protection for their hands.

    • Meets ANSI /ISEA 125 Level 2 Conformity and Arc Flash PPE Category 4+ standards with an arc rating of 140 cal/cm2. Please refer to NFPA 70E or CSA Z462 Standards for specific selection requirements. 
    • Arc flash gloves are made from a lightweight and durable Aramid fabric and are the perfect solution for thermographers or any electrical worker that needs arc flash protection for their hands.
    • Color Black
    • Made in the USA
    Not rated yet
    Please or to buy this product.

Shopping options

 
£
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
Reset filter