Boddingtons Electrical 30kV Dielectric Safety Boots Class 3 Certified, with a Steel ToeCap and Vulcanized Rubber Sole - UK Sizes 3-15 (EU Sizes 35-50)

Not rated yet
0

A Class 3 AC (EN 50321-1:2018) electrically insulating dielectric boot with an integral steel toe cap. The Workmaster™ Dielectric HV3+ boot allows high voltage live working at up to 26.5kV with every boot tested at 30kV.

  • Lightweight design for increased wearer comfort
  • Low temperature flexibility down to -40ºC
  • Durable, slip resistant vulcanised rubber for maximum grip
  • Energy absorbing tunnel system in heel and ergonomic cushioning insole (removable and machine washable) for greater wearer comfort
  • Cold insulation to EN ISO 20345
  • High-visibility green HV3 compound shaft
  • Meets the requirements of ASTM 1117 (20kV)
  • Also available in a moulded sole version (without fuel & oil resistance, resistance to hot contact or cold insulation for the sole and SRA slip)
Please or to buy this product.

Over 30% of industrial accidents result from slips, trips and falls - as boots are used in an environment where there are liquids present, a slip resistant sole is crucial, which is why we fit a high-performance vulcanised rubber sole to our boots. This provides a number of important benefits:

  • Lightweight design for increased wearer comfort
  • Low temperature flexibility down to -40ºC
  • Durable, slip resistant vulcanised rubber for maximum grip
  • Energy absorbing tunnel system in heel and ergonomic cushioning insole (removable and machine washable) for greater wearer comfort
  • Cold insulation to EN ISO 20345
  • High-visibility green HV3 compound shaft
  • Meets the requirements of ASTM 1117 (20kV)
  • Also available in a moulded sole version (without fuel & oil resistance, resistance to hot contact or cold insulation for the sole and SRA slip)

Boot Shaft 

  • High-visibility green HV3 compound shaft 
  • 200 Joule epoxy coated steel toe cap 
  • Seamless construction 
  • Lightweight design for increased wearer comfort 
  • Low temperature flexibility down to -40℃ 
  • Kick off lug • Extra shin protection 
  • Adjustable height • Ankle guard 
  • Non-wicking knitted nylon lining 
  • REACH Compliant

Boot Sole 

  • Slip resistant vulcanised rubber for maximum grip 
  • Energy absorbing tunnel system in heel and ergonomic cushioning insole (removable & machine washable) for greater wearer comfort 
  • Cold insulation to EN ISO 20345

Care:

  • Machine washable at up to 40℃
  • Shelf life of over 10 years

Options 

  • Additional High DC Voltage test 
  • Removable thermal liner

Certification:

  • Safety Footwear EN ISO 20345:2011 - SB HRO FO E CI SRC
  • Electrically Insulating Footwear EN 50321:2018 Class 3 AC
  • Dielectric Footwear ASTM F1117
  • Personal Protective Equipment PPE DIR 89/686/EEC
    • SKU
      30KVBootsVRS
  • Material
    High-visibility green HV3 compound shaft
  • Safety Class Category
    Class 3 (Electrically Insulating Footwear)
  • Electrical Resistance Tested UpTo
    Every boot tested to 30kV
  • Sizes Available (UK/EU)
    UK Sizes 3-15 (EU Sizes 35-50)
  • Manufacturer
    Workmaster™ Boots
  • Sizes Available
    UK Size 3 - EU Size 35, UK Size 4 - EU Size 36, UK Size 5 - EU Size 37, UK Size 6 - EU Size 39, UK Size 7 - EU Size 41, UK Size 8 - EU Size 42, UK Size 9 - EU Size 43, UK Size 10 - EU Size 44, UK Size 11 - EU Size 45, UK Size 12 - EU Size 46, UK Size 13 - EU Size 47, UK Size 14 - EU Size 49, UK Size 15 - EU Size 50

Boddingtons Electrical Ltd partner with TNT for the majority of our UK Mainland, Ireland, Northern Ireland and Channel Islands consignments. Should you wish for your orders to have shipping notifications you can advise of an email address that we can add to the TNT shipping software to initiate this for your account.

TNT Tracking 

You can use the link below to trace your order once a tracking number has been sent to you via email.

https://www.tnt.com/express/en_gb/site/shipping-tools/tracking.html

Cut-Off Times

A purchase order placed before 1 pm with the item ex-stock can be processed for same day shipment. We do have the flexibility to process orders at a later time but please check with customer services . 

Services Levels Summary

UK Mainland Services

  • Standard - 2-3 working days , untimed service - by end of business day. 
  • Express - Next-day working delivery, untimed service - by end of business day. 
  • 12:00 - Next-day delivery - guaranteed by noon - (Delivery by 12am next working day throughout most of the UK Mainland: Delivery are not guaranteed but currently enjoy a very high success rate. We do not offer any refunds on compensation for timed services) 
  • 10:00 - Next-day delivery - guaranteed by 10am  - (Delivery by 10am next working day throughout most of the UK Mainland: Delivery are not guaranteed but currently enjoy a very high success rate. We do not offer any refunds on compensation for timed services) 
  • 9:00 - Next-day delivery - guaranteed by 9am - (Delivery by 9am next working day throughout most of the UK Mainland: Delivery are not guaranteed but currently enjoy a very high success rate. We do not offer any refunds on compensation for timed services) 

Channels Islands

  • Standard - 3-4 working days , untimed service - by end of business day.

Northern Ireland

  • Standard - 2-3 working days , untimed service - by end of business day. 
  • Express - Next-day working delivery, untimed service - by end of business day. 

Pallet Services

Our electrical switchboard matting is considerably heavy and can only be shipped via a third party pallet service. Unfortunately we cannot offer tracking information when using this service level. Any orders over a 40Kg will automatically be sent on a pallet service

Minimum Order Value

The minimum order value for carriage paid orders is £250.00 (nett) excluding vat.

Carriage paid orders exclude Timed Services such as 9am/10am/Noon.

Our minimum order level is £30.00 and maybe subject to a minimum order value of £10.00 excl vat however a carriage charge will be applied depending on the service level chosen.  

Export Customers

For all non UK mainland customers we quote Ex-Works (EXW).

EXW means that the seller has delivered when they place or deliver suitably packaged goods at the disposal of the buyer at an agreed-upon place (i.e. the works, factory, warehouse, etc.). The goods are not cleared for export.

The seller is not required to load the goods onto a collecting vehicle and, if they do, it is at the buyer’s expense. EXW is the only Incoterm where the goods are not required to be cleared for export, although the seller has the duty to assist the buyer (at the buyer’s expense) with any needed documentation and export approvals.

After collection, the buyer must provide the seller with proof that they collected the goods. From collection, the buyer is responsible for all risks, costs and clearances.

Customer reviews
There are no comments yet. Be the first to leave a comment
Please sign in to add review

Our online payments are processed by Worldpay

Boddingtons Electrical Ltd take your security very seriously. Utilising a high level of encryption, all financial transactions on this site are processed by Worldpay. At the payment stage of check-out, you will be securely transferred to Worldpay's encrypted server to complete your payment. If your card is enrolled in either the "3D Secure" or "Verified by Visa" schemes, you will be also be referred to MasterCard or Visa to complete this enhanced level of security. Your card details are never made available to us and no payment information is ever stored on our servers - you can shop in complete confidence!

Card payments are only accepted from UK customers only.

Alternatively you can arrange to make a BACS payment , in which this detail will be provided on our proforma invoice. This option is available to UK customers and for Export customers.

EN 50321-1:2018 is the new standard for insulating footwear for live working and was published earlier this year, it replaces EN 50321:1999 and is currently out for approval as an IEC standard which will make it a global standard, not just European.

The main changes in the 2018 revision are the introduction of new 4 classes (see below) for working up to 36 KV (the old standard only went up to Class 0 - 1 KV). Boots are now tested by filling with water instead of ball bearings to simulate water or perspiration potentiality wicking up the lining and creating a flash over. There is also now an electrical test after perforation of the sole by a nail, to ensure boots still give electrical protection after perforation. Even non-metallic perforation inserts can allow water to pass through them so will allow an electrical current to pass when the sole is punctured. The table below lists the classes and the test requirements:

Class RatingMaximum Working VoltageWithstand Test VoltageLeakage Current Test VoltageMaximum Leakage Current
Class 00500V5kV2.5kV3mA
Class 01kV10kV5kV5mA (8mA)
Class 17.5kV20kV10kV10mA (16mA)
Class 217.5kV30kV20kV18mA
Class 326.5kV40kV30kV20mA
Class 436kV50kV40kV24mA

(Overboot requirements are in brackets where they are different from knee high boots)